Schneider Electric 65KA 2P DC Surge Protective Devices

In Stock

The Schneider Electric 65KA 2P DC Surge Protective Devices are specifically designed to protect electrical and electronic equipment from transient overvoltage caused by lightning or other sources. These surge protective devices (SPDs) are intended for use in direct current (DC) applications, providing reliable protection for sensitive equipment such as solar arrays, battery systems, and other DC power sources.

  • Delivered today (order Mon-Fri before 12:00, delivery between 17:00 and 22:00)
  • Including shipping costs, sent by klbtheme.com
  • Pick up at a klbtheme.com collection point is possible
  • 30 days to change your mind and free returns
  • Day and night customer service

Description

Schneider Electric 65KA 2P DC Surge Protective Devices

Acti 9 Surge Protection Devices – SPDs

To save the system from different magnitudes of surge voltages, the capacity or magnitude of the surge arrester varies. The amplitude can range from a few millivolts to some ten thousand volts. Schneider Electric Nigeria comes with a series of surge protection devices that can be installed in the system to ensure protection from over or under voltage. To use this, install a plug-in, point-of-use electrical surge protector. The device can be plugged into a grounded electrical outlet or can be directly connected into the appliance. Lightning protective devices are developed, tested, and classified according to their international series of product standards, and they have defined surge protection functions and performance parameters to make them suitable for use with similar protection concepts.

Surge Protection Devices

Every customer has a story. Their unforgettable moments, their comfortable space, their passion. Lightning can destroy all these moments. Schneider electric Surge Protection devices can protect these valuable memories. A single unit will protect the entire house.

iPRD65r modular surge arrester – 2P – 350V – with remote transfer

This Acti9 iPRD65r surge arrester protects 2P installations. It allows quick replacement of damaged cartridges. This Type 2 device is recommended for very high risk level and incoming panel board. It offers remote reporting of the “cartridge must be changed” message. It can be turned over to allow the phase/neutral/earth cables to enter through either the top or the bottom. The associated circuit breaker Isc breaking capacity can go up to 50kA. It is compatible with TT and TN-S earthing system. The Uc maximum continuous operating voltage in common mode (L/PE or N/PE) is 350VAC. The Up Voltage protection level in common mode (L/PE or N/PE) is 1.5kV. The Ue rated operational voltage is 230VAC +/- 10%. The product colour is white (RAL9003).The dimensions are (W) 36mm x (H) 85mm x (D) 69mm. The weight is 268g. The degree of protection is IP20 and IP40 in modular enclosure. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C. This product is compliant with EN 61643-11 and IEC 61643-11 standards.

Specifications

Main
range of product Acti9
Product name Acti9 iPRD
Product or component type Surge arrester with pluggable cartridge
Device short name iPRD65r
Device application Distribution
Standards EN 61643-11:2012
IEC 61643-11:2011
Product certifications CE
Quality labels KEMA-KEUR
NF
poles description 2P
Remote signalling With
Signal contacts composition 1 SD (1 C/O)
Surge arrester type Electrical distribution network
Earthing system TN-C-S
Complementary
Surge arrester class type Type 2
Surge arrester technology MOV
[Ue] rated operational voltage 230 V AC (+/- 10 %) at 50/60 Hz
[In] nominal discharge current Common mode: 20 kA (L/PE)
Common mode: 20 kA (N/PE)
[Imax] maximum discharge current Common mode: 65 kA L/PE
Common mode: 65 kA N/PE
[Uc] maximum continuous operating voltage Common mode: 350 V L/PE
Common mode: 350 V N/PE
Maximum [Up] voltage protection level Common mode <1.5 kV type 2 L/PE
Common mode <1.5 kV type 2 N/PE
[Ut] temporary overvoltage 337 V L/N 5 s withstand
1200 V N/PE 200 ms safe failure mode
Disconnector device type Associated circuit breaker IC60N 50 A curve C – Icu 10 kA
Associated circuit breaker iC60H 50 A curve C – Icu 15 kA
Associated circuit breaker NG125N 50 A curve C – Icu 25 kA
Associated circuit breaker NG125H 50 A curve C – Icu 36 kA
Associated circuit breaker NG125L 50 A curve C – Icu 50 kA
Associated fuse gG 80 A – Icu 50 kA
Signalling circuit voltage 0.25 A/250 V AC 50/60 Hz
Mounting mode Clip-on (DIN rail)
9 mm pitches 4
Height 85 mm
Width 36 mm
Depth 69 mm
Net weight 0.268 kg
Colour White (RAL 9003)
[Ipe] Ground residual current 0.6 mA
0.003 mA
Connections – terminals Tunnel type terminal (downside) 2.5…35 mm²
Tunnel type terminal (upside) 2.5…35 mm²
Tightening torque 2.5 N.m
Environment
IK degree of protection IK03 conforming to IEC 62262
Relative humidity 5…95 %
Operating altitude 2000 m
Ambient air temperature for operation -25…60 °C
Ambient air temperature for storage -40…85 °C
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 7.2 cm
Package 1 Width 4.2 cm
Package 1 Length 9.2 cm
Package 1 Weight 300 g
Unit Type of Package 2 BB1
Number of Units in Package 2 6
Package 2 Height 8.5 cm
Package 2 Width 10 cm
Package 2 Length 27.5 cm
Package 2 Weight 1.886 kg
Unit Type of Package 3 S03
Number of Units in Package 3 54
Package 3 Height 30 cm
Package 3 Width 30 cm
Package 3 Length 40 cm
Package 3 Weight 17.144 kg
Contractual warranty
Warranty 18 months

 

Reviews

There are no reviews yet.

Be the first to review “Schneider Electric 65KA 2P DC Surge Protective Devices”

Your email address will not be published. Required fields are marked *