Zodion Photo Electric Lighting Control Kit Photocell ST306
ST306 Full automatic sensor adjustable light control sensor photocell sensor switch
The product can turn on or turn off light automatically according to ambient-light. Ambient temperature and humidity can’t affect it. It is not only convenient but also practical; it can control the load working only at night. It is used for road light, garden light etc.
- Delivering: We offer Nationwide Delivery - Monday - Saturday
- Call: +2348063316412
- Customer Care: We offer technical support and after sales service
- Address: Shop F464 F-Line Industrial Section, Alaba International Market, Ojo, Lagos State, Nigeria.
Description
Zodion Photo Electric Lighting Control Kit Photocell ST306
Welcome to use ST306 light-control sensor!
ST306 Full automatic sensor adjustable light control sensor photocell sensor switch
The product can turn on or turn off light automatically according to ambient-light. Ambient temperature and humidity can’t affect it. It is not only convenient but also practical; it can control the load working only at night. It is used for road light, garden light etc.
SPECIFICATION:
Power source: 220-240V/A C Power Frequency: 50Hz
Rated Current: 6A Ambient Light: <5-15LUX
Working Temperature: -20~+40℃ Working Humidity: <93%RH
Lifetime and Warranty:
| Lifetime (hr) | 26000-45000 at least |
| Warranty | 3 years |
INSTALLATION:
Ø Switch off the power. Unload the black bottom from the white roof directly.
Ø Unscrew two nails in the black bottom and unload into two parts.(see figure 1)
Ø Pass the wire through the hole in the bottom and connect the power according to the connection-wire diagram.
Ø Install back the two nails and according to the correct installation place install the item with the enclosed inflated screws(see figure 2)
Install back the white roof onto the black bottom. Turn on the power and then test it.
CONNECTION-WIRE DIAGRAM:
TEST:
Ø Switch on the power.
Ø When you test in daytime. You should cover a black opaque cloth on the product.
Ø When the cloth mantles the detection window of the photocell, the ambient light of the photocell is dark, the lamp will be on.
Ø When you take off this cloth, the lamp will be off automatically.
NOTE:
Ø In front of the photocell, it should be no obstruction affecting to accept natural light;
Ø In front of the photocell, it should be no swaying object.
Ø Don’t install the photocell under the light or in the place where the light will be irradiated to the photocell.
PRODUCT CAPACITY:
Our company adopts automatic machines,such as:SMD,auto component inserter,wave solder,auto injection machine and so on.And the daily output is up to 20000~30000pcs.
Related products
